Details
This is a sending unit for oil pressure or any other 0-100psi pressure, but not recommended for fuel. It will work for fuel but these seem to not last long measuring fuel pressure. Can be fed into the VEMS ECU Analog Input to monitor the pressure.
Input is 5V and Gnd, with a 0-5V output linear to 0-100psi.
Pin 1: Gnd
Pin 2: 5V
Pin 3: 0.5-4.5V pressure signal output for 0-100 psi (slope appr: 4V / 7 bar, or 1V/25psi)
0.5V = 0psi
1.0V = 12.5psi
1.5V = 25psi
2.0V = 37.5psi
2.5V = 50psi
3.0V = 62.5psi
3.5V = 75psi
4.0V = 87.5psi
4.5V = 100psi
Connector is included.
Thread is 1/8NPT