V3 Repair / Upgrade

Checkout with "Check/Money Order or IBAN wire transfer" payment option because the final sum might be lower or higher depending on the result of investigation.

• Costs No Charge for warranty repair or replacement in the warranty period (~12 months after purchase), problem is a manufacturing defect.
• Small repairs: Included in this cost for small repairs and extensions like swapping mcp3208 or tpic6a259dw (=p259), adding wheelspeed input, more analog inputs, conversion to triple-HALL input (for new VVTI camshaft-angle-control applications) etc...
• SDcard install + small repairs: If you order an SD card module along with this Repair/Upgrade we will install it at no additional cost.
• Mainboard replacement: This is available, and suggested for very old hardware, but please contact us first.
• These prices apply to purchased "Assembled v3.x controllers". Does not apply to self-assembled hardware. Do not send self-assembled boxes, especially without negotiation
• Motronic55/Motronic88 retest/repair/mainboard replacement is +$100 on top of above prices (or 0 EUR for warranty).
• if damage is caused by harness, but harness is not fixed after a repair, and this results in repeated return, expect a surcharge.
• The above fees apply if this "virtual product" is actually ordered (no need to pay in advance, checkout with "Check/Money Order, IBAN/pay later") and device is sent to the right address (see below unless instructed otherwise by the shop crew), not to invoice billing address.

Please write "I authorize mainboard replacement if necessary" or "I do NOT authorize mainboard replacement" in order comment and on paper sent with returned v3 controller. Normally crew attempts to contacts on phone if mainboard replacement is justified.

---

From USA, send device to VEMS, 226 S Oak Cir, Colchester, VT 05446, USA. From other places, see the http://shop.vems.hu/catalog/ web store
In any case, include a paper with the returned item:

• your name, phone
• postal return address
• "retest/repair only", or "retest/repair + more inputs if possible (analog/wheelspeed)" (defualt), or "retest/repair + change primary trigger input to VR" or whatever applies. Any operation missing from the paper and requested later costs + 18 EUR even if it would have been included in the base price (the ecu needs to be opened and clamped repeatedly)
• this orderID
• original orderID (if possible)
• history of the device (what happened), with any relevant reference to wiring, etc...
• relevant MembersPage (this really helps)
• the text "I authorize mainboard replacement if necessary" (to make things faster in such cases)